This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our site and services and assist with our promotional and marketing efforts. You can read more about this in our Privacy Policy.
HPE Aruba Networking Aruba 2530 8G PoE+ Managed L2 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Grey
xOut of Stock
Contact your account manager
- HP 2530-8G-PoE+ Switch
SKU #: J9774AR
EAN #: 0888182074329
UNSPSC #: 43222612
Power over ethernet | Yes |
---|---|
Stackable | Yes |
Ports type | Gigabit Ethernet (10/100/1000) |
Ports quantity | 8 |
SKU | J9774AR |
EAN | 0888182074329 |
Manufacturer | HPE |
Availability | Out of Stock |
Product Family | Aruba Networking |
Management features | |
---|---|
Multicast support | Yes |
Switch type | Managed |
Web-based management | Yes |
Quality of Service (QoS) support | Yes |
MIB support | Yes |
Switch layer | L2 |
Ports & interfaces | |
Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Virtual LAN features | |
VLAN support | Yes |
Performance | |
Packet buffer memory | 1.5 MB |
Stackable | Yes |
Virtual stacking (units) | 16 |
Processor frequency | 800 MHz |
Memory type | DDR3-SDRAM |
Internal memory | 256 MB |
Flash memory | 128 MB |
Built-in processor | Yes |
Technical details | |
Virtual stacking (units) | 16 |
Form factor | 1U |
Product colour | Grey |
Stackable | Yes |
Processor frequency | 800 MHz |
Rack mounting | Yes |
Built-in processor | Yes |
Network | |
Auto-sensing | Yes |
Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u |
Full duplex | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Rate limiting | Yes |
Port mirroring | Yes |
Link aggregation | Yes |
Flow control support | Yes |
Auto MDI/MDI-X | Yes |
10G support | No |
Data transmission | |
Throughput | 14.8 Mpps |
Latency (10-100 Mbps) | 7.4 µs |
Latency (1 Gbps) | 2.6 µs |
Packet buffer memory | 1.5 MB |
MAC address table | 16000 entries |
Switching capacity | 20 Gbit/s |
Jumbo frames support | Yes |
Security | |
---|---|
SSH/SSL support | Yes |
Access Control List (ACL) | Yes |
DHCP features | DHCP server |
Multicast features | |
Multicast support | Yes |
Memory | |
Packet buffer memory | 1.5 MB |
Memory type | DDR3-SDRAM |
Internal memory | 256 MB |
Flash memory | 128 MB |
Design | |
Form factor | 1U |
Product colour | Grey |
Stackable | Yes |
Rack mounting | Yes |
Power | |
Power supply included | Yes |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 86 W |
Power over Ethernet (PoE) | |
Total Power over Ethernet (PoE) budget | 67 W |
Power over Ethernet (PoE) | Yes |
Operational conditions | |
Storage temperature (T-T) | -40 - 70 °C |
Storage relative humidity (H-H) | 15 - 90% |
Operating temperature (T-T) | 0 - 45 °C |
Operating relative humidity (H-H) | 15 - 95% |
Heat dissipation | 65 BTU/h |
Weight & dimensions | |
Width | 254 mm |
Depth | 159.5 mm |
Height | 44.5 mm |
Weight | 1 kg |
The HP 2530 Switch Series consists of 12 fully managed Layer 2 edge switches that deliver cost-effective, reliable, secure, and easy-to-use connectivity to business networks. Designed for entry-level to midsize enterprise networks, these Gigabit and Fast Ethernet switches deliver full Layer 2 capabilities with optional PoE+, enhanced access security, traffic prioritization, and IPv6 host support. The HP 2530 Switch Series offers uplink flexibility with four Gigabit Ethernet uplinks on all 24- and 48-port models. Gigabit Ethernet uplinks are four small form-factor pluggable (SFP) slots for fiber connectivity on the 24- and 48-port Gigabit Ethernet models. The Fast Ethernet 24- and 48-port models have two SFPs and two RJ-45 Gigabit uplinks. The compact and fanless 8-port switches offer additional flexibility with two dual-personality ports that can be used as either RJ-45 Gigabit Ethernet or SFP ports. For customers implementing Power over Ethernet for voice, video, or wireless deployments, the HP 2530 PoE+ switches are IEEE 802.3af and IEEE 802.3at compliant with up to 30 W per port. The switch series is easy to use, deploy, and manage via SNMP, CLI, and Web GUI. It offers flexible wall, table, and rack mounting; quiet operation with fanless and variable speed fan models; and improved power savings, with features such as IEEE 802.3 az (Energy Efficient Ethernet). These switches include a lifetime warranty, as well as all software releases and technical phone support.
Quality of Service (QoS)
• Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
Management
• Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.
Connectivity
• IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
Layer 2 switching
• VLANs: provides support for 512 VLANs and 4,094 VLAN IDs
Security
• Access control lists (ACLs): accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models)
Convergence
• LLDP-MED (Media Endpoint Discovery): defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
Resiliency and high availability
• Port trunking and link aggregation: Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections; supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models). IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic configuration.
Quality of Service (QoS)
• Traffic prioritization (IEEE 802.1p): allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP)
Management
• Choice of management interfaces: Web graphical user interface (GUI): HTML-based easy-to-use graphical interface allows configuration of the switch from any Web browser. Command-line interface (CLI): provides advanced configuration and diagnostics through a robust CLI. Simple Network Management Protocol (SNMPv1/v2c/v3): allows a switch to be managed with a variety of third-party network management applications.
Connectivity
• IPv6: IPv6 host: allows the switch to be deployed and managed at the edge of an IPv6 network. Dual stack (IPv4/IPv6): supports connectivity for both protocols; provides a transition mechanism from IPv4 to IPv6. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.
Layer 2 switching
• VLANs: provides support for 512 VLANs and 4,094 VLAN IDs
Security
• Access control lists (ACLs): accommodates IPv4/IPv6 port and VLAN-based ACLs (IPv6 ACL is supported only on Gigabit Ethernet and 48-port models)
Convergence
• LLDP-MED (Media Endpoint Discovery): defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
Resiliency and high availability
• Port trunking and link aggregation: Trunking: supports up to eight links per trunk to increase bandwidth and create redundant connections; supports L2, L3, and L4 trunk load-balancing algorithm (L4 trunk load balancing is supported only on Gigabit Ethernet and 48-port models). IEEE 802.3ad Link Aggregation Protocol (LACP): eases configuration of trunks through automatic configuration.
Management features | |
---|---|
Multicast support | Yes |
Switch type | Managed |
Web-based management | Yes |
Quality of Service (QoS) support | Yes |
MIB support | Yes |
Switch layer | L2 |
Ports & interfaces | |
Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
Basic switching RJ-45 Ethernet ports quantity | 8 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Virtual LAN features | |
VLAN support | Yes |
Performance | |
Packet buffer memory | 1.5 MB |
Stackable | Yes |
Virtual stacking (units) | 16 |
Processor frequency | 800 MHz |
Memory type | DDR3-SDRAM |
Internal memory | 256 MB |
Flash memory | 128 MB |
Built-in processor | Yes |
Technical details | |
Virtual stacking (units) | 16 |
Form factor | 1U |
Product colour | Grey |
Stackable | Yes |
Processor frequency | 800 MHz |
Rack mounting | Yes |
Built-in processor | Yes |
Network | |
Auto-sensing | Yes |
Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u |
Full duplex | Yes |
VLAN support | Yes |
Spanning tree protocol | Yes |
Rate limiting | Yes |
Port mirroring | Yes |
Link aggregation | Yes |
Flow control support | Yes |
Auto MDI/MDI-X | Yes |
10G support | No |
Data transmission | |
Throughput | 14.8 Mpps |
Latency (10-100 Mbps) | 7.4 µs |
Latency (1 Gbps) | 2.6 µs |
Packet buffer memory | 1.5 MB |
MAC address table | 16000 entries |
Switching capacity | 20 Gbit/s |
Jumbo frames support | Yes |
Security | |
---|---|
SSH/SSL support | Yes |
Access Control List (ACL) | Yes |
DHCP features | DHCP server |
Multicast features | |
Multicast support | Yes |
Memory | |
Packet buffer memory | 1.5 MB |
Memory type | DDR3-SDRAM |
Internal memory | 256 MB |
Flash memory | 128 MB |
Design | |
Form factor | 1U |
Product colour | Grey |
Stackable | Yes |
Rack mounting | Yes |
Power | |
Power supply included | Yes |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 86 W |
Power over Ethernet (PoE) | |
Total Power over Ethernet (PoE) budget | 67 W |
Power over Ethernet (PoE) | Yes |
Operational conditions | |
Storage temperature (T-T) | -40 - 70 °C |
Storage relative humidity (H-H) | 15 - 90% |
Operating temperature (T-T) | 0 - 45 °C |
Operating relative humidity (H-H) | 15 - 95% |
Heat dissipation | 65 BTU/h |
Weight & dimensions | |
Width | 254 mm |
Depth | 159.5 mm |
Height | 44.5 mm |
Weight | 1 kg |