This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our site and services and assist with our promotional and marketing efforts. You can read more about this in our Privacy Policy.
HPE Aruba Networking AP-214 1300 Mbit/s White Power over Ethernet (PoE)
xOut of Stock
Contact your account manager
- 2.4/5 GHz
- 1.3 Gbps
- 3×3 MIMO
- 3 x RP-SMA
- DSSS
SKU #: JW169A
EAN #: 0190017020709
UNSPSC #: 43222640
High-performance and cost-effective 210-series 802.11ac APs maximize mobile device performance in medium- to high-density Wi-Fi environments.
Leveraging three spatial streams, these dual-radio APs deliver wireless data rates up to 1.3 Gbps for 802.11ac and up to 450 Mbps for 802.11n-enabled mobile devices.
The AP-215 and IAP-215 models have six integrated omni-directional downtilt antennas, while the AP-214 and IAP-214 support external, detachable dual-band antennas using three RP-SMA connectors.
Not just faster, smarter
With AppRF™ and ClientMatch™, 210-series APs protect business-critical apps and eliminate sticky clients while roaming.
Friendly to Aruba Bluetooth Beacons
Connect Aruba Beacons to any 210-series USB port to deliver indoor location services that can be centrally managed.
You have the freedom to choose
The 210 series can be managed by an Aruba Mobility Controller or deployed in controllerless Aruba Instant mode.
Choose your operating mode
The 210 series supports your choice of operating modes to meet unique management and deployment requirements.
- Controller-managed AP or Remote AP (RAP) running ArubaOS™. When managed by Aruba Mobility Controllers, 210 series APs offer centralized configuration, data encryption, policy enforcement and network services as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.
- Aruba Instant™ AP running InstantOS™. In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.For large installations across multiple sites, the Aruba Activate™ service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory-shipped to any site and configure themselves when powered up.
Leveraging three spatial streams, these dual-radio APs deliver wireless data rates up to 1.3 Gbps for 802.11ac and up to 450 Mbps for 802.11n-enabled mobile devices.
The AP-215 and IAP-215 models have six integrated omni-directional downtilt antennas, while the AP-214 and IAP-214 support external, detachable dual-band antennas using three RP-SMA connectors.
Not just faster, smarter
With AppRF™ and ClientMatch™, 210-series APs protect business-critical apps and eliminate sticky clients while roaming.
Friendly to Aruba Bluetooth Beacons
Connect Aruba Beacons to any 210-series USB port to deliver indoor location services that can be centrally managed.
You have the freedom to choose
The 210 series can be managed by an Aruba Mobility Controller or deployed in controllerless Aruba Instant mode.
Choose your operating mode
The 210 series supports your choice of operating modes to meet unique management and deployment requirements.
- Controller-managed AP or Remote AP (RAP) running ArubaOS™. When managed by Aruba Mobility Controllers, 210 series APs offer centralized configuration, data encryption, policy enforcement and network services as well as distributed and centralized traffic forwarding. Please refer to the Aruba Mobility Controller data sheets for more details.
- Aruba Instant™ AP running InstantOS™. In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.For large installations across multiple sites, the Aruba Activate™ service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory-shipped to any site and configure themselves when powered up.
SKU | JW169A |
---|---|
EAN | 0190017020709 |
Manufacturer | HPE |
In Stock | N |
Data transmission | |
---|---|
Ethernet LAN data rates | 10,100,1000 Mbit/s |
Maximum data transfer rate | 1300 Mbit/s |
Performance | |
2.4 GHz | Yes |
5 GHz | Yes |
Auto MDI/MDI-X | Yes |
Transmitting power | 23 dBmW |
Reset button | Yes |
Firmware upgradeable | Yes |
Spread spectrum method | DSSS |
Quality of Service (QoS) support | Yes |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az |
Modulation | 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, OFDM, QPSK |
Ethernet LAN data rates | 10,100,1000 Mbit/s |
Channel bandwidth | 80 MHz |
Certification | FCC CE R&TTE 1999/5/EC Low Voltage 2006/95/EC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 |
Maximum data transfer rate | 1300 Mbit/s |
MIMO | Yes |
Wireless LAN features | |
Modulation | 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, OFDM, QPSK |
Network | |
Spread spectrum method | DSSS |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az |
Bandwidth | |
Channel bandwidth | 80 MHz |
Security | |
Cable lock slot | Yes |
Management features | |
Quality of Service (QoS) support | Yes |
Firmware upgradeable | Yes |
Certificates | |
Certification | FCC CE R&TTE 1999/5/EC Low Voltage 2006/95/EC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 |
Features | |
2.4 GHz | Yes |
5 GHz | Yes |
Auto MDI/MDI-X | Yes |
Transmitting power | 23 dBmW |
Spread spectrum method | DSSS |
Quality of Service (QoS) support | Yes |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az |
Modulation | 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, OFDM, QPSK |
Ethernet LAN data rates | 10,100,1000 Mbit/s |
Channel bandwidth | 80 MHz |
Maximum data transfer rate | 1300 Mbit/s |
MIMO | Yes |
Ports & interfaces | |
WAN connection | Ethernet (RJ-45) |
USB connector type | USB Type-A |
USB 2.0 ports quantity | 1 |
Ethernet LAN (RJ-45) ports | 1 |
DC-in jack | Yes |
Power | |
---|---|
Power consumption (max) | 14.9 W |
Power over Ethernet (PoE) | Yes |
Design | |
Placement | Ceiling |
Product colour | White |
Reset button | Yes |
LED indicators | Yes |
Certification | FCC CE R&TTE 1999/5/EC Low Voltage 2006/95/EC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 |
Cable lock slot | Yes |
Cable lock slot type | Kensington |
Antenna | |
Number of connectors | 3 |
Antenna type | Internal |
Antenna gain level (max) | 2 dBi |
Antenna connector type | RP-SMA |
Antenna features | Detachable antenna |
Technical details | |
Transmitting power | 23 dBmW |
Reset button | Yes |
Firmware upgradeable | Yes |
Harmonized System (HS) code | 85176990 |
Indication | |
LED indicators | Yes |
Weight & dimensions | |
Width | 180 mm |
Depth | 180 mm |
Weight | 610 g |
Height | 45 mm |
Package width | 220 mm |
Package depth | 225 mm |
Package height | 55 mm |
Package weight | 860 g |
Packaging data | |
Mounting kit | Yes |
Package width | 220 mm |
Package depth | 225 mm |
Package height | 55 mm |
Package weight | 860 g |
AC adapter included | No |
Packaging content | |
Mounting kit | Yes |
AC adapter included | No |
Operational conditions | |
Operating relative humidity (H-H) | 5 - 95% |
Operating temperature (T-T) | 0 - 50 °C |
Storage temperature (T-T) | -40 - 70 °C |
Logistics data | |
Harmonized System (HS) code | 85176990 |