This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our site and services and assist with our promotional and marketing efforts. You can read more about this in our Privacy Policy.
APC MGE Galaxy 300 uninterruptible power supply (UPS) Double-conversion (Online) 10 kVA 8000 W 3 AC outlet(s)
xOut of Stock
Contact your account manager
- 10kVA 400V 3:1 with 30min Battery
- Start-up 5x8
SKU #: G3HT10K3IB2S
UNSPSC #: 39121011
| Output power capacity | 10 kVA |
|---|---|
| Product colour | Grey |
| Output power | 8000 W |
| Form factor | Tower |
| SKU | G3HT10K3IB2S |
| Manufacturer | APC |
| Availability | Out of Stock |
| Power | |
|---|---|
| Input power factor | 0.94 |
| Output power | 8000 W |
| Input operation voltage (min) | 323 V |
| Input operation voltage (max) | 477 V |
| Output operation voltage (min) | 220 V |
| Output operation voltage (max) | 240 V |
| Maximum current | 65 A |
| Efficiency | 91.8% |
| Emergency Power Off (EPO) | Yes |
| Output voltage Total Harmonic Distortion (THD) | 3% |
| Crest factor | 2.5:1 |
| Output power capacity | 10 kVA |
| Performance | |
| UPS topology | Double-conversion (Online) |
| Waveform | Sine |
| Number of output phases | 1 |
| Number of input phases | 3 |
| Number of phases | 3 |
| LED indicators | Status, Battery replacement |
| Surge protection | Yes |
| Power protection features | Overload |
| Features | |
| Web-based management | Yes |
| UPS topology | Double-conversion (Online) |
| Waveform | Sine |
| Number of output phases | 1 |
| Number of input phases | 3 |
| Input power factor | 0.94 |
| Output power | 8000 W |
| Input operation voltage (min) | 323 V |
| Input operation voltage (max) | 477 V |
| Output operation voltage (min) | 220 V |
| Output operation voltage (max) | 240 V |
| Maximum current | 65 A |
| Efficiency | 91.8% |
| Surge protection | Yes |
| Emergency Power Off (EPO) | Yes |
| Power protection features | Overload |
| Output voltage Total Harmonic Distortion (THD) | 3% |
| Crest factor | 2.5:1 |
| Output power capacity | 10 kVA |
| Input frequency | 45/65 Hz |
| Number of phases | 3 |
| Ports & interfaces | |
| Emergency Power Off (EPO) connector | Yes |
| AC outlets quantity | 3 AC outlet(s) |
| Power plug | Terminal |
| Battery | |
| Battery voltage | 192 V |
| Battery technology | Sealed Lead Acid (VRLA) |
| Battery recharge time | 10 h |
| Design | |
| Form factor | Tower |
| LED indicators | Status, Battery replacement |
| Product colour | Grey |
| Certification | CE, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, IEC 61000-4-5, IEC 62040-2, TUV, VFI-SS-111 |
| Display type | LED |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 35 °C |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95% |
| Storage relative humidity (H-H) | 0 - 95% |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 9000 m |
| Technical details | |
|---|---|
| Compliance certificates | RoHS |
| Management features | |
| Web-based management | Yes |
| Weight & dimensions | |
| Package width | 800 mm |
| Package depth | 965 mm |
| Package height | 1440 mm |
| Weight | 320 kg |
| Width | 400 mm |
| Package weight | 354 kg |
| Height | 1300 mm |
| Depth | 860 mm |
| Packaging data | |
| Quick installation guide | Yes |
| Resource CD | Yes |
| Package width | 800 mm |
| Package depth | 965 mm |
| Package height | 1440 mm |
| Package weight | 354 kg |
| Certificates | |
| Certification | CE, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, IEC 61000-4-5, IEC 62040-2, TUV, VFI-SS-111 |
| Other features | |
| Number of phases | 3 |
| Packaging content | |
| Quick installation guide | Yes |
| Resource CD | Yes |
Manageability
Integrated network management
Provides complete remote monitoring and control of the UPS. Enables you to monitor remote UPS's from a web browser or industry standard Network Management System.
Convenience
Easy to install
Innovative design allows for fast, easy installation by almost anybody.
Economy
Cost of acquisition
Designed to provide an optimized price/performance ratio, a number of exceptional features have been carefully selected to optimize both performance and cost benefits.
Serviceability
Front-access servicing
Simplifies installation and UPS maintenance while minimizing space requirements.
5x8 Start-up service included
Required for full coverage of factory warranty
Availability
Wide input voltage range
Designed for harsh electrical environments to save battery life.
Dual feed input
Allows installation of two independent power sources with the option of hot stand-by configuration to provide redundancy for mission critical applications.
Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
Integrated network management
Provides complete remote monitoring and control of the UPS. Enables you to monitor remote UPS's from a web browser or industry standard Network Management System.
Convenience
Easy to install
Innovative design allows for fast, easy installation by almost anybody.
Economy
Cost of acquisition
Designed to provide an optimized price/performance ratio, a number of exceptional features have been carefully selected to optimize both performance and cost benefits.
Serviceability
Front-access servicing
Simplifies installation and UPS maintenance while minimizing space requirements.
5x8 Start-up service included
Required for full coverage of factory warranty
Availability
Wide input voltage range
Designed for harsh electrical environments to save battery life.
Dual feed input
Allows installation of two independent power sources with the option of hot stand-by configuration to provide redundancy for mission critical applications.
Double conversion on-line topology
Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
| Power | |
|---|---|
| Input power factor | 0.94 |
| Output power | 8000 W |
| Input operation voltage (min) | 323 V |
| Input operation voltage (max) | 477 V |
| Output operation voltage (min) | 220 V |
| Output operation voltage (max) | 240 V |
| Maximum current | 65 A |
| Efficiency | 91.8% |
| Emergency Power Off (EPO) | Yes |
| Output voltage Total Harmonic Distortion (THD) | 3% |
| Crest factor | 2.5:1 |
| Output power capacity | 10 kVA |
| Performance | |
| UPS topology | Double-conversion (Online) |
| Waveform | Sine |
| Number of output phases | 1 |
| Number of input phases | 3 |
| Number of phases | 3 |
| LED indicators | Status, Battery replacement |
| Surge protection | Yes |
| Power protection features | Overload |
| Features | |
| Web-based management | Yes |
| UPS topology | Double-conversion (Online) |
| Waveform | Sine |
| Number of output phases | 1 |
| Number of input phases | 3 |
| Input power factor | 0.94 |
| Output power | 8000 W |
| Input operation voltage (min) | 323 V |
| Input operation voltage (max) | 477 V |
| Output operation voltage (min) | 220 V |
| Output operation voltage (max) | 240 V |
| Maximum current | 65 A |
| Efficiency | 91.8% |
| Surge protection | Yes |
| Emergency Power Off (EPO) | Yes |
| Power protection features | Overload |
| Output voltage Total Harmonic Distortion (THD) | 3% |
| Crest factor | 2.5:1 |
| Output power capacity | 10 kVA |
| Input frequency | 45/65 Hz |
| Number of phases | 3 |
| Ports & interfaces | |
| Emergency Power Off (EPO) connector | Yes |
| AC outlets quantity | 3 AC outlet(s) |
| Power plug | Terminal |
| Battery | |
| Battery voltage | 192 V |
| Battery technology | Sealed Lead Acid (VRLA) |
| Battery recharge time | 10 h |
| Design | |
| Form factor | Tower |
| LED indicators | Status, Battery replacement |
| Product colour | Grey |
| Certification | CE, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, IEC 61000-4-5, IEC 62040-2, TUV, VFI-SS-111 |
| Display type | LED |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 35 °C |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating relative humidity (H-H) | 0 - 95% |
| Storage relative humidity (H-H) | 0 - 95% |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 9000 m |
| Technical details | |
|---|---|
| Compliance certificates | RoHS |
| Management features | |
| Web-based management | Yes |
| Weight & dimensions | |
| Package width | 800 mm |
| Package depth | 965 mm |
| Package height | 1440 mm |
| Weight | 320 kg |
| Width | 400 mm |
| Package weight | 354 kg |
| Height | 1300 mm |
| Depth | 860 mm |
| Packaging data | |
| Quick installation guide | Yes |
| Resource CD | Yes |
| Package width | 800 mm |
| Package depth | 965 mm |
| Package height | 1440 mm |
| Package weight | 354 kg |
| Certificates | |
| Certification | CE, EN/IEC 62040-1-1, EN/IEC 62040-2, EN/IEC 62040-3, IEC 61000-4-5, IEC 62040-2, TUV, VFI-SS-111 |
| Other features | |
| Number of phases | 3 |
| Packaging content | |
| Quick installation guide | Yes |
| Resource CD | Yes |